Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X30-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 30mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke30 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10
Dial in a precise forward stop without swapping hardware using the AirTAC MICJ40X30-10. This round-body stainless steel mini cylinder features an external screw that shortens the extend stroke by up to 10 mm on site, giving you a usable forward range of 20 to 30 mm. At the same time, a needle-set adjustable air cushion at both ends absorbs high-speed shock, letting you set the position and control the impact simultaneously.
The stainless barrel and piston rod resist mild corrosion and washdown environments. Because this specific SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG sensors. It is a non-ISO-6432 size, relying purely on its robust riveted construction rather than a standard mini mounting interface.
Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10 Is Used
Product Diversion
Handles high-speed lane shifting of dense packaged goods, relying on the adjustable air cushion to decelerate the 40 mm piston smoothly at the end of travel.
Carton Sealing
Applies consistent downward pressure on large cartons, where the stainless construction resists moisture and the forward stroke is fine-tuned on-site for varying box heights.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10 the Right Cylinder?
When sizing this 40 mm bore, moving down to a MICJ32 drops the 0.5 MPa push force to 402.2 N, while no larger MICJ bore exists above it. This makes the MICJ40X30-10 the top choice in the family for high-force, fast set-position moves where you need to trim the extend end by up to 10 mm. The adjustable stop screw sets the forward end position but is not a mid-stroke lock; the cylinder will drift on air loss, so add an external rod lock or pilot check valve for held loads.
Mounting options include LB foot, FA flange, and TC trunnion, but the SDB pivot-block is not available on this adjustable-stroke variant. Back covers include CA, U, R, and CM. Remember that without the -S magnet, magnetic sensing is impossible on this unit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10 FAQ
At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, allowing a usable forward range of 20 to 30 mm, while the needle-set adjustable air cushion at both ends absorbs high-speed impact. This cylinder does not hold position on air loss and the cushion is not a brake; use an external rod lock for suspended loads. Note that this non-S SKU cannot take magnetic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X30-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.