Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X350-100S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 350mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S
Dial in a precise forward stop on-site with the AirTAC MICJ40X350-100S, a round-body stainless steel mini cylinder that shortens the extend stroke by up to 100 mm via an external screw. The usable extend range becomes 250-350 mm, letting you set the exact end position without swapping hardware. A needle-set adjustable air cushion at both ends soaks up high-speed shock, while the stainless barrel and rod resist mild corrosion and washdown environments.
It features a 1/4" port, an M12x1.25 male rod thread, and a built-in magnet (-S) for CMSG, DMSG or EMSG sensors. Note that Ø40 is a non-ISO-6432 size, and the stop screw only sets the end position—it is not a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S Is Used
Adjustable Pusher Stop
Acts as a settable pusher for varying pallet depths, trimming the extend end by up to 100 mm on-site while the stainless build handles humid dock environments.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S the Right Cylinder?
This model shines in fast set-position moves where the 100 mm extend trim and dual air cushions prevent harsh impacts. For mounting, choose LB foot, FA flange or TC trunnion, plus CA, U, R or CM back covers (SDB pivot-block is not available on this adjustable variant).
The -S magnet enables CMSG, DMSG and EMSG position sensing. Remember that a standard cylinder does not hold its load on air loss; the piston drifts, and the cushion only decelerates near the stroke end. For a held load, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S FAQ
This double-acting Ø40 cylinder uses a 1/4" port. At 0.5 MPa it pushes with 628.3 N and pulls with 527.8 N. At 0.7 MPa it pushes with 879.6 N and pulls with 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm (usable extend 250-350 mm), while a needle valve adjusts the air cushion at both ends to decelerate high-speed impacts. The -S suffix means it has a magnet for CMSG, DMSG or EMSG sensors. The stop screw is not a mid-stroke lock; the piston drifts on air loss, so use an external rod lock for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X350-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.