Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X450-50 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 450mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke450 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50
Dial in a precise forward stop on-site with the AirTAC MICJ40X450-50, a stainless-steel round-body mini cylinder featuring a 50 mm extend-stroke adjuster and a needle-set air cushion at both ends. The external screw trims the extend end position down from the 450 mm maximum without swapping hardware, while the dual cushions soak up high-speed shock. As a non-ISO 6432 Ø40 bore, it runs on a 1/4" port with a Ø16 rod and M12x1.25 male thread.
The stainless barrel and rod resist mild washdown corrosion. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors; the stop screw and cushions decelerate the load but do not lock mid-stroke.
Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50 Is Used
Pallet Stopper Gate
Arrest pallets at a packing station; the adjustable air cushion absorbs the 450 mm high-speed stroke impact while the stop screw sets the exact resting position.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50 the Right Cylinder?
The 50 mm extend adjuster is ideal for fast set-position moves where you need to tune the forward impact without re-engineering the machine.
Mount using LB foot, FA flange or TC trunnion brackets, as the SDB pivot-block is not offered on this adjustable variant. Because a plain cylinder drifts on air loss, add an external rod lock or pilot check valve if the load must be held. For position sensing, select the -S magnet variant to enable CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50 FAQ
This double-acting Ø40 bore cylinder pushes 628.3 N and pulls 527.8 N at 0.5 MPa, pushes 879.6 N and pulls 738.9 N at 0.7 MPa, with a theoretical max of 128.1 kgf at 1.0 MPa. It uses a 1/4" air port and a Ø16 rod with an M12x1.25 male thread.
An external screw shortens the extend stroke by up to 50 mm on-site, letting you set the forward end position without changing the cylinder. Needle-set air cushions at both ends absorb high-speed shock but only decelerate near stroke end; they do not lock the load. This non-magnet SKU cannot take sensors, so choose the -S variant for CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X450-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.