Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X450-75 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 450mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke450 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75
Shave up to 75 mm off the forward end position on site with the AirTAC MICJ40X450-75, a stainless round-body mini cylinder built for double-acting operation. An external stop screw lets you dial in the extend stroke from 375 to 450 mm without swapping hardware, while a needle-set adjustable air cushion at both ends soaks up high-speed impact.
Because this is a non-magnet SKU, it cannot host CMSG, DMSG, or EMSG sensors. The stainless steel barrel and rod shrug off mild washdown corrosion.
Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75 Is Used
Pallet Divert Stop
Arrest heavy pallets moving at 600 mm/s by tuning the needle cushion to soften the end stop, trimming the extend position up to 75 mm to match pallet width.
Vertical Lift Gate
Hoist a 30 kg material gate using the 0.5 MPa push force, adjusting the extend end precisely to clear overhead obstructions without over-travel.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75 the Right Cylinder?
This model shines when you need rapid set-position moves—the 75 mm extend adjuster sets the exact forward stop, and the dual adjustable air cushions decelerate the payload smoothly at speeds up to 800 mm/s.
Remember that the stop screw and cushions only manage end-of-stroke impact; they do not lock the rod mid-stroke. If gravity or air loss causes drift, install an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable here), and note that adding a magnet requires the -S version for sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75 FAQ
This 40 mm bore cylinder features a 1/4" port and a 16 mm rod.
An external screw shortens the extend stroke by up to 75 mm on site, giving a usable 375-450 mm forward travel while retract remains full. Needle valves adjust the air cushion at both ends to decelerate high-speed loads. This SKU lacks a magnet, so it cannot take sensors; choose the -S variant for CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.