Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10
Dial in a precise forward stop on site with the AirTAC MICJ40X60-10, a round-body stainless steel mini cylinder built for double-acting operation. An external screw trims the extend stroke by up to 10 mm, letting you set the end position between 50 and 60 mm without swapping hardware. A needle-adjustable air cushion at both ends soaks up high-speed shock, while the 1/4" port feeds a robust 628.3 N push force at 0.5 MPa.
The stainless barrel and piston rod resist mild corrosion and washdown environments, making it a durable choice for heavy-duty automation. Because this SKU lacks a magnet, it cannot host CMSG, DMSG, or EMSG sensors; order the -S variant if you require position detection. With a practical safe working load around 377 N, it easily moves roughly 32 kg vertically with a 2:1 safety margin.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10 Is Used
Heavy Press Dampening
Use the 628.3 N thrust to drive a pressing head, relying on the 10 mm extend adjustment to set the exact crush depth and the needle cushion to absorb the high-speed impact.
Pallet Stopper Arm
Deploy this 40 mm bore cylinder as a heavy pallet stop, dialing the forward stop nut to match pallet thickness while the dual air cushions prevent endcap shock at 800 mm/s.
Vertical Lift Gate
Lift a 32 kg material gate using the 0.5 MPa push force, adjusting the extend stroke by up to 10 mm to seat the gate precisely without hard mechanical banging.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10 the Right Cylinder?
When sizing this 40 mm bore unit, consider stepping down to the MICJ32 (402.2 N push @0.5 MPa) for lighter loads, as no larger MICJ bore exists. The 10 mm extend adjuster paired with the dual air cushions is ideal for fast, settable-position moves where you must tune the impact deceleration. Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot block is not offered on this adjustable-stroke frame. Remember that the stop screw sets the end position but is not a mid-stroke lock; the cylinder will drift on air loss, so add an external rod lock or pilot check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10 FAQ
This double-acting cylinder uses a 1/4" port and generates 628.3 N push and 527.8 N at 0.5 MPa, or 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, and a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. This SKU has no magnet for sensors, and because the cushion only decelerates, you need an external rod lock or pilot check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.