Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S
Trimming the forward end by up to 10 mm on site, this AirTAC round-body mini cylinder lets you dial in a 50-60 mm extend position without swapping hardware. The MICJ40X60-10S is a double-acting stainless-steel actuator featuring a needle-set variable air cushion at both ends to soak up high-speed shock. It carries a 1/4" port, a Ø16 mm piston rod with an M12x1.25 male thread, and a built-in magnet for position sensing.
Delivering 628.3 N of push force at 0.5 MPa, it easily handles a safe working load of roughly 377 N or lifts about 32 kg vertically with a 2:1 safety margin. The stainless barrel and rod resist mild corrosion and washdown environments. Because this is a Ø40 bore, it uses a non-ISO-6432 mounting interface, and the -S magnet enables CMSG, DMSG, or EMSG switches for precise end-of-stroke detection.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S Is Used
Heavy Diverter Gate
Shifts a robust sorting gate on a packaging line. The 628.3 N push force moves the load, while the 10 mm extend stop dials in the exact deflect angle and the air cushion absorbs the high-speed impact.
Pallet Stopper Arm
Halts 32 kg work carriers on a gravity roller conveyor. The adjustable forward stop ensures the arm meets the pallet edge perfectly, and the stainless build survives dusty warehouse environments.
Carton Flap Folder
Folds heavy cardboard flaps at high cycle rates. The dual adjustable cushions prevent bounce at stroke ends, and the 1/4" port delivers the air volume needed for rapid 30-800 mm/s actuation.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S the Right Cylinder?
When sizing this actuator, step down to the Ø32 bore for lighter loads (402.2 N push @0.5 MPa) or step up if you need more power, though Ø40 is the largest available MICJ. This 628.3 N unit is ideal for fast, settable-position moves where the 10 mm extend adjuster and dual air cushions prevent end-of-stroke banging. Choose LB foot, FA flange, or TC trunnion mounts, plus CA, U, R, or CM back covers. Note that SDB pivot blocks are not offered on adjustable-stroke variants.
The external screw sets the forward stop but is not a mid-stroke lock. If air pressure drops, the piston drifts and the cushion only decelerates near the end of travel. To hold a load securely during air loss, install an external rod lock or pilot-operated check valve. Since this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S FAQ
This Ø40 bore cylinder has a 1/4" port and an M12x1.25 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum of 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, letting you set the forward end position without moving the cylinder. A needle valve adjusts the air cushion at both ends to decelerate the piston before impact. The -S magnet allows CMSG, DMSG, or EMSG sensors to detect position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.