Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X60-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S
Dial in the exact forward stop on-site with the MICJ40X60-75S, a round-body stainless mini cylinder featuring a 75 mm extend-stroke adjuster. This double-acting actuator uses an external screw to shorten the extend end position from its 60 mm nominal maximum down to zero, while the retract stroke remains full. A needle-set variable air cushion at both ends soaks up high-speed shock, letting you control both the end position and the impact deceleration.
The stainless-steel barrel and rod resist mild corrosion and washdown environments. Because this SKU includes the -S magnet, it supports CMSG, DMSG and EMSG sensors for position detection. Note that the stop screw only sets the end position—it is not a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S Is Used
Product Diverting
Handles heavier packages on a sorting line, using the 75 mm extend trim to dial in the exact pusher distance without moving the cylinder mount.
Carton Sealing
Drives a sealing head at high speed into the end position, relying on the dual adjustable air cushions to absorb the impact and prevent crushed cartons.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S the Right Cylinder?
The adjustable stop and dual air cushions are ideal for fast, settable-position moves where you must tune the forward impact.
Mount using LB foot, FA flange or TC trunnion brackets, or choose CA, U, R or CM back covers (the SDB pivot-block is not available on this adjustable variant). A plain cylinder drifts on air loss—the cushion only decelerates near the stroke end, never locking the load—so specify an external rod lock or pilot check valve if you need to hold a suspended weight.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S FAQ
This 40 mm bore cylinder features a 1/4" port and a 16 mm rod. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
The external stop screw shortens the extend stroke by up to 75 mm (usable extend 0-60 mm), while the needle-set variable air cushion at both ends decelerates the piston near stroke ends to absorb high-speed shock. The -S suffix means a built-in piston magnet is included for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X60-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.