Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X75-75 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75
Dial in the forward stop on site without swapping cylinders: the MICJ40X75-75 uses an external screw to shorten the extend end by up to 75 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. This double-acting round-body mini cylinder features a stainless-steel barrel and rod for mild washdown resistance, operating at speeds of 30-800 mm/s via a 1/4" port.
Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75 Is Used
Heavy Carton Diversion
Pushes heavy cartons at high speed on a packaging line, using the 75 mm extend trim to dial the exact push distance while the dual air cushions absorb the impact at stroke end.
Pallet Stopper Gate
Acts as a heavy-duty stop gate for loaded pallets, tuning the extend position on site to match pallet depth and using the adjustable cushions to survive fast impacts.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75 the Right Cylinder?
The 75 mm extend trim and dual air cushions shine in fast set-position moves where you must tune the forward stop and decelerate the impact without changing the hardware.
Because a plain cylinder drifts on air loss, the stop screw and cushions only set the end position and decelerate—they do not lock mid-stroke. Use an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB is not available), and select the -S variant if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75 FAQ
The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 75 mm, and needle valves tune the adjustable air cushions at both ends to decelerate high-speed impacts. This SKU has no magnet for sensors. The cushions and stop screw do not lock mid-stroke; the piston drifts on air loss, so use an external rod lock for held loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X75-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.