Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X80-100 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 80mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ40 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100
Dial in a precise forward stop without swapping hardware using the AirTAC MICJ40X80-100 round-body mini cylinder. An external stop screw shortens the extend end by up to 100 mm on-site, yielding a usable 0-80 mm extend stroke, while a needle-set variable air cushion at both ends soaks up high-speed shock.
This Ø40 bore features a 1/4" port, a 16 mm piston rod, and an M12x1.25 male thread. Note this non-ISO-6432 SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors, and the stop screw is an end-position setter, not a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100 Is Used
High-Speed Divertor
Reroute heavy boxes at high cycle rates; the dual adjustable air cushions absorb the end-of-stroke shock, preventing premature wear on the diverter arm.
Vertical Lift Gate
Raise and lower a 32 kg access panel smoothly, relying on the tuned extend position to hit the exact closed height every time without hard impacts.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100 the Right Cylinder?
The adjustable extend stop plus dual air cushions shine in fast set-position moves where you must tune the forward impact. For suspended loads, remember the piston drifts on air loss; the cushion only decelerates near the end, so add an external rod lock or pilot check valve. Mount via LB, FA, or TC (SDB is unavailable here), and choose the -S variant if you need sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100 FAQ
The theoretical maximum force is 128.1 kgf at 1.0 MPa. It uses a 1/4" air port.
An external screw shortens the extend stroke by up to 100 mm on-site, while needle valves tune the variable air cushions at both ends to decelerate high-speed impacts. It does not hold position on air loss; use an external rod lock for that. This non-S SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X80-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.