Airtac MIJ Adjustable Cylinder MIJ16X10-10
The AirTAC MIJ Adjustable Cylinder MIJ16X10-10 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X10-10
Trimming the forward position by up to 10 mm via an external stop screw, this double-acting round-body mini cylinder lets you dial in the exact extend endpoint on-site without swapping parts. The stainless-steel rolled barrel and Ø6 mm piston rod supply mild washdown resistance, while the M5×0.8 port feeds a bore that conforms to the ISO 6432 mounting interface for straightforward bracket interchange.
Fixed TPU bumper pads decelerate the stroke end, and because this SKU lacks the -S magnet, it cannot host CMSG/DMSG/EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X10-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X10-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X10-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X10-10 Is Used
Gauge Positioning
Dial in the 10 mm extend stop to touch off a part gauge with 60 N of safe force, absorbing fixture tolerances without bending the probe.
Clamp Deflection Take-up
Use the adjustable forward stop to compensate for jaw deflection, ensuring a consistent 5.1 kg clamping lift across multiple tooling changes.
Is the Airtac MIJ Adjustable Cylinder MIJ16X10-10 the Right Cylinder?
If you need less thrust, the Ø12 bore drops the 0.5 MPa push force to 56.5 N; stepping up to the Ø20 bore raises it to 157.0 N. The 10 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds during setup. Remember the stop screw only sets the extend endpoint—it is not a mid-stroke lock, so add an external pilot check valve if you must hold a load on air loss. You can use LB foot, FA flange or TC trunnion mounts, but the SDB pivot block is not offered on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X10-10 FAQ
This 16 mm bore cylinder uses an M5×0.8 port and a Ø6 mm rod. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, letting you fine-tune the forward end position without changing the cylinder. Retract remains full stroke. Note this SKU has no -S magnet, so it cannot accept position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.