Airtac MIJ Adjustable Cylinder MIJ16X10-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X10-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X10-10S
Dial in your forward end position on-site with the AirTAC MIJ16X10-10S, a round-body stainless steel mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel by up to 10 mm to take up mechanical tolerances or stage feeds, all without changing the cylinder itself. The retract stroke remains full length, and the screw strictly sets the end stop rather than acting as a mid-stroke lock.
Built with a riveted stainless barrel and piston rod, this double-acting unit handles mild washdown environments and drops directly into standard ISO 6432 mini-cylinder brackets. Because this SKU carries the -S suffix, a built-in piston magnet enables CMSG, DMSG, or EMSG position sensing. Pneumatic connections use an M5×0.8 port, and fixed TPU bumper pads decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ16X10-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X10-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X10-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X10-10S Is Used
Staged Component Placement
Leverage the -S magnet with a DMSG sensor to confirm part placement, dialing the extend end position in precisely to drop lightweight 5 kg assemblies into nested trays.
Is the Airtac MIJ Adjustable Cylinder MIJ16X10-10S the Right Cylinder?
When sizing this 16 mm bore against adjacent options, stepping down to a 12 mm bore drops your push force to 56.5 N at 0.5 MPa, while moving up to a 20 mm bore increases it to 157.0 N. The 10 mm on-site adjustment is ideal for changeover jobs where you need one part number to cover several slightly different forward stops. For vertical loads, remember that a standard cylinder drifts on air loss—the stop screw and fixed bumpers only manage the end position, so add an external pilot check valve if you need to hold a load mid-cycle. You can mount this unit using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers, but the SDB pivot block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X10-10S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, letting you set the exact forward position without swapping cylinders; the retract stroke remains full. The -S suffix means it includes a piston magnet for CMSG, DMSG, or EMSG sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.