Airtac MIJ Adjustable Cylinder MIJ16X10-10STC
The AirTAC MIJ Adjustable Cylinder MIJ16X10-10STC is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X10-10STC
Trimming the forward end by up to 10 mm via an external stop screw, this round-body stainless mini cylinder lets you fine-tune the extend position on-site without swapping hardware.
Built with a stainless-steel barrel and rod to resist mild corrosion and washdown environments, it conforms to the ISO 6432 mounting interface for easy bracket drops. The -S suffix equips the piston with a magnet for CMSG, DMSG or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X10-10STC Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X10-10STC |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X10-10STC
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X10-10STC Is Used
Changeover Stops
Quickly adjust the forward stop for different product lengths on a packaging line without changing out the entire cylinder assembly.
Tolerance Take-Up
Absorb minor mechanical deviations in a light assembly press by fine-tuning the end position within the 10 mm window.
Is the Airtac MIJ Adjustable Cylinder MIJ16X10-10STC the Right Cylinder?
The 10 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds during changeovers. It uses an M5×0.8 port and an M6x1.0 male rod thread.
The stop screw sets the forward end position but does not function as a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve for holding loads. Mount via the included TC trunnion or standard LB/FA brackets (SDB is not offered on this adjustable variant). Fixed TPU bumper pads decelerate the stroke ends across the 30-800 mm/s speed range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X10-10STC FAQ
It uses an M5×0.8 port. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm on-site, while retract remains full. The -S suffix means a piston magnet is built-in for CMSG, DMSG or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X10-10STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.