Airtac MIJ Adjustable Cylinder MIJ16X15-20S
The AirTAC MIJ Adjustable Cylinder MIJ16X15-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X15-20S
Dial in the exact forward end position on site with the AirTAC MIJ16X15-20S, a double-acting round-body mini cylinder featuring a 20mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel from the nominal 15mm down to zero without swapping parts, while retract remains full length. The stainless-steel barrel and piston rod supply mild corrosion resistance for washdown environments.
The M5×0.8 port and M6x1.0 male rod thread ensure straightforward integration, and the -S suffix means a piston magnet is included for CMSG, DMSG or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X15-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X15-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X15-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X15-20S Is Used
Light Duty Pin Insertion
Set a precise forward end position to press a pin to a specific depth, taking up mechanical tolerances with the external screw while operating within the 5.1kg vertical lift margin.
Is the Airtac MIJ Adjustable Cylinder MIJ16X15-20S the Right Cylinder?
The 20mm external stop screw is ideal for taking up mechanical tolerances during setup or covering several short forward stops with one part number. You can use LB foot, FA flange or TC trunnion mounts, but note that the SDB pivot block is not available on this adjustable variant.
The stop screw sets the forward end position only; it is not a mid-stroke lock. This cylinder relies on fixed TPU bumper pads to decelerate the stroke end and will drift if air pressure is lost. To hold a load securely during an air loss event, add an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X15-20S FAQ
The theoretical maximum force is 20.5kgf at 1.0MPa.
An external stop screw shortens the extend stroke by up to 20mm on site, letting you dial in the forward end position; retract travel remains full. The -S suffix indicates a built-in piston magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X15-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.