Airtac MIJ Adjustable Cylinder MIJ16X150-20S
The AirTAC MIJ Adjustable Cylinder MIJ16X150-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X150-20S
Dial in a precise forward end position on-site with the AirTAC MIJ16X150-20S, a round-body stainless steel mini cylinder featuring a 20 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 150 mm nominal length down to 130 mm, absorbing setup tolerances or accommodating multiple part stops without swapping hardware. Retract remains full length, and the screw acts only as an end-position setter, not a mid-stroke lock.
The -S suffix denotes a built-in piston magnet for CMSG, DMSG, or EMSG position sensing, and internal fixed TPU bumpers decelerate the stroke ends across the 30-800 mm/s speed range. The M5×0.8 port handles air delivery, while the male M6x1.0 rod thread secures your tooling.
Airtac MIJ Adjustable Cylinder MIJ16X150-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X150-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X150-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X150-20S Is Used
Light Assembly Tolerance Take-up
Absorb minor fixture misalignments in small part pressing tasks by trimming the extend end position, preventing damage to components that require under 5.1 kg of force.
Is the Airtac MIJ Adjustable Cylinder MIJ16X150-20S the Right Cylinder?
Choose this model when your application demands roughly 60 N of safe working force and benefits from on-site adjustability. The 20 mm stop screw is ideal for taking up mechanical tolerances or staging feeds during changeovers. For vertical or suspended loads, remember this cylinder will drift on air loss—the stop screw and TPU bumpers do not function as a locking brake. Install an external pilot check valve or rod lock if you need true position holding.
This adjustable-stroke variant supports LB foot, FA flange, and TC trunnion mounts, but the SDB pivot block is not available. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for end-of-stroke confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X150-20S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 20 mm (usable range 130-150 mm) without affecting the full retract stroke. The -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG, and EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X150-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.