Airtac MIJ Adjustable Cylinder MIJ16X150-30S
The AirTAC MIJ Adjustable Cylinder MIJ16X150-30S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X150-30S
Dial in your forward end position on the fly with the AirTAC MIJ16X150-30S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 30 mm on-site, giving a usable forward range of 120-150 mm without swapping parts. The retract stroke remains full length. This on-site adjustability is perfect for taking up manufacturing tolerances or handling rapid changeover jobs.
The riveted stainless barrel and piston rod resist mild corrosion and washdown environments. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing. It features an M5×0.8 port, an M6x1.0 male rod thread, and conforms to the ISO 6432 mounting interface for standard mini brackets.
Airtac MIJ Adjustable Cylinder MIJ16X150-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X150-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X150-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X150-30S Is Used
Adjustable Stop Gauging
Use the 30 mm extend adjustment to fine-tune a physical stop for checking part dimensions, accommodating different material batches without changing the cylinder.
Staged Feed Diverter
With about 5.1 kg of vertical lift capacity, this unit pushes lightweight packages at varying forward positions to route them down distinct conveyor lanes.
Is the Airtac MIJ Adjustable Cylinder MIJ16X150-30S the Right Cylinder?
The 30 mm adjustment window is highly useful for prototyping and setup, allowing one part number to cover several slightly different stop points. Keep in mind the external screw only trims the extend end; it does not function as a mid-stroke lock.
For mounting, you can utilize LB foot, FA flange, or TC trunnion brackets, along with CA, U, R, or CM back covers (note that the SDB pivot-block is not available on this adjustable variant). Fixed TPU bumper pads decelerate the piston at the stroke ends across the 30-800 mm/s speed range. Remember that a standard cylinder drifts on air loss; if your application requires the load to be held securely, integrate an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X150-30S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm (retract remains full). The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. The stainless build resists mild corrosion, and fixed TPU bumpers cushion the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X150-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.