Airtac MIJ Adjustable Cylinder MIJ16X150-40S
The AirTAC MIJ Adjustable Cylinder MIJ16X150-40S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X150-40S
Dial in a precise forward end position on-site with the AirTAC MIJ16X150-40S, a round-body stainless steel mini cylinder featuring a 40 mm adjustable extend window. An external stop screw trims the forward stroke from 150 mm down to 110 mm, allowing one part number to cover multiple stop lengths without swapping hardware. Retract remains full stroke, and the screw sets the end position but is not a mid-stroke lock.
The stainless barrel and rod resist mild corrosion and washdown environments. Built to ISO 6432 mounting dimensions, it drops into standard mini brackets, and the included -S magnet supports CMSG, DMSG, or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ16X150-40S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X150-40S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X150-40S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X150-40S Is Used
Staged Part Diversion
Cycle the 150 mm stroke to divert lightweight packages on a washdown line, relying on the stainless construction and M5×0.8 port for reliable pneumatic response.
Changeover Pusher Setup
Swap product families and rotate the external stop screw to shorten the extend end position, handling varied box sizes with a single cylinder and a CMSG sensor.
Is the Airtac MIJ Adjustable Cylinder MIJ16X150-40S the Right Cylinder?
Choose this 16 mm option when your setup requires around 60 N of safe working force and benefits from trimming the extend stroke by up to 40 mm to absorb mechanical tolerances or stage feeds. Fixed TPU bumper pads decelerate the stroke ends across the 30-800 mm/s speed range.
This actuator does not hold a load on air loss; the piston drifts, so apply an external rod lock or pilot check valve for suspended loads. Mounting options include LB foot, FA flange, and TC trunnion brackets, plus CA, U, R, and CM back covers, but the SDB pivot block is not available on this adjustable variant. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG switches for end-of-stroke confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X150-40S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 40 mm on-site, setting the forward end position without affecting the full retract stroke. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X150-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.