Airtac MIJ Adjustable Cylinder MIJ16X150-50
The AirTAC MIJ Adjustable Cylinder MIJ16X150-50 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X150-50
Dial in a precise forward end position on the fly with the AirTAC MIJ16X150-50, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 50 mm on site, giving you a usable forward range of 100 to 150 mm without swapping parts. Retract remains at the full 150 mm. The riveted stainless barrel and Ø6 mm rod shrug off mild washdown and corrosion.
It features fixed TPU bumper pads to decelerate the stroke end and uses an M5×0.8 port. Because this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X150-50 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X150-50 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X150-50
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X150-50 Is Used
Light Assembly Press
Provides a 60 N safe push to seat small electronic clips, using the 50 mm extend adjustment to dial in the exact contact depth without retooling.
Package Diverter Gate
Handles carton routing with a 5.1 kg vertical lift capacity, while the adjustable forward stop accommodates varying box widths on the fly.
Staged Parts Feed
Pushes lightweight delrin blanks into a machining cell, relying on the on-site stroke shortening to set multiple staged stop positions from one cylinder.
Is the Airtac MIJ Adjustable Cylinder MIJ16X150-50 the Right Cylinder?
The 50 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds during changeovers. Remember that the stop screw only trims the extend end; it is not a mid-stroke lock. If your application must hold a load on air loss, fit an external rod lock or pilot check valve, as the piston will drift.
Mounting follows the ISO 6432 mini-cylinder interface, compatible with standard LB foot, FA flange, and TC trunnion brackets (SDB pivot blocks are not offered on this adjustable variant). For position feedback, select the -S magnet version to enable sensor use.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X150-50 FAQ
At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 50 mm on site, letting you set the forward end position precisely. Retract remains full. The screw is not a mid-stroke lock; the piston drifts on air loss, so use a pilot check valve for load holding. This SKU has no magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X150-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.