Airtac MIJ Adjustable Cylinder MIJ16X150-75S
The AirTAC MIJ Adjustable Cylinder MIJ16X150-75S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X150-75S
Dial in a precise forward end position on-site with the AirTAC MIJ16X150-75S, a double-acting round-body mini cylinder featuring a 75 mm extend-stroke adjustment window. An external stop screw lets you trim the forward travel from 150 mm down to 75 mm without changing the unit, while retract remains full length. Built with a stainless-steel barrel and rod, it handles mild washdown environments and conforms to the ISO 6432 mounting interface for straightforward bracket integration.
The M5×0.8 port and M6x1.0 male rod thread deliver efficient airflow, while fixed TPU bumper pads decelerate the stroke ends. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ16X150-75S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X150-75S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X150-75S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X150-75S Is Used
Adjustable Stop Feeding
Trim the forward stroke by up to 75 mm to push varying part lengths into a fixture without retooling the entire cylinder setup.
Tolerance Take-Up Clamping
Dial in the exact 100.5 N clamping endpoint on the fly to compensate for material thickness variations in light assembly tasks.
Staged Ejection Pusher
Use the magnet for position confirmation and adjust the extend stop to eject boxes of different sizes from a conveyor at 5.1 kg lift capacity.
Is the Airtac MIJ Adjustable Cylinder MIJ16X150-75S the Right Cylinder?
The Ø16 hits a practical middle ground at 100.5 N, and the 75 mm on-site stop screw is invaluable for taking up mechanical tolerances or staging feeds across changeover jobs. You can set the exact extend endpoint without swapping hardware.
Remember that the stop screw sets the end position but does not function as a mid-stroke lock; the piston will drift if air pressure is lost, so fit an external rod lock or pilot check valve for held loads. For mounting, utilize LB foot, FA flange, or TC trunnion brackets (SDB pivot blocks are not available on this adjustable variant). Speeds range from 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X150-75S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
The external stop screw shortens the extend stroke by up to 75 mm on-site (usable extend 75-150 mm) while retract remains full; it sets the end position but is not a mid-stroke lock. The -S suffix means a piston magnet is built-in for CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X150-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.