Airtac MIJ Adjustable Cylinder MIJ16X160-75
The AirTAC MIJ Adjustable Cylinder MIJ16X160-75 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 160mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X160-75
Dial in a precise forward end position on-site with the AirTAC MIJ16X160-75, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 75 mm, yielding a usable forward travel of 85 to 160 mm without changing the unit. The retract stroke remains full length. This on-site adjustability allows one part number to cover several stop distances, absorbing mechanical tolerances during setup.
The riveted stainless barrel and rod resist mild corrosion and washdown environments. It uses the ISO 6432 mounting interface for standard mini brackets, features an M5×0.8 port, and relies on fixed TPU bumper pads to decelerate the stroke end.
Airtac MIJ Adjustable Cylinder MIJ16X160-75 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X160-75 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X160-75
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X160-75 Is Used
Adjustable Stop Clamping
Clamp parts of varying widths on the same fixture.
Variable Length Diverter
Route differently sized cartons on a line by tuning the diverter arm extension. You can shorten the forward stroke on-site to match package dimensions while relying on the stainless build for washdown durability.
Tolerance Take-up Pusher
Push bins into a staging area and compensate for cumulative mechanical tolerances. The external screw trims the extend end position precisely, ensuring bins align perfectly without custom spacers.
Is the Airtac MIJ Adjustable Cylinder MIJ16X160-75 the Right Cylinder?
If your application requires less force, the smaller Ø12 MIJ bore provides 56.5 N; if you need more power, stepping up to the Ø20 MIJ bore yields 157.0 N. The 75 mm adjustment window is highly useful for prototyping or absorbing cumulative mechanical tolerances, letting you fine-tune the extend end position without machining new spacers. Retract travel stays fixed at the full 160 mm.
This SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors; choose an -S variant if you require position detection. You can mount the cylinder using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers, but the SDB pivot block is not available for this adjustable type. Remember that the stop screw only sets the end position—it is not a mid-stroke lock. The piston will drift on air loss, so add an external rod lock or pilot check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X160-75 FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa. The air port size is M5×0.8.
An external stop screw shortens the extend stroke by up to 75 mm, giving a usable forward travel of 85 to 160 mm; the retract stroke remains full length. The screw only sets the end position and is not a mid-stroke lock. The cylinder drifts on air loss, so you need an external rod lock or pilot check valve to hold a load. This SKU has no magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X160-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.