Airtac MIJ Adjustable Cylinder MIJ16X175-100S
The AirTAC MIJ Adjustable Cylinder MIJ16X175-100S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X175-100S
Dial in a precise forward end position on-site with the AirTAC MIJ16X175-100S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 100 mm, providing a usable forward range of 75 to 175 mm without swapping parts. The retract stroke remains full length. Because the piston rod and barrel are stainless steel, the unit resists mild corrosion and handles washdown environments well. It uses the ISO 6432 mounting interface for standard mini brackets.
The M5×0.8 port and M6x1.0 male rod thread ensure straightforward integration. This -S SKU includes a piston magnet for CMSG, DMSG, or EMSG sensors, and fixed TPU bumper pads decelerate the stroke ends. The stop screw sets the forward position but is not a mid-stroke lock.
Airtac MIJ Adjustable Cylinder MIJ16X175-100S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X175-100S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X175-100S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Is the Airtac MIJ Adjustable Cylinder MIJ16X175-100S the Right Cylinder?
The 100 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds across changeover jobs, letting one part number cover several stop distances. For vertical or suspended loads, remember that a standard cylinder drifts on air loss; add an external rod lock or pilot check valve to hold position.
Mounting options include LB foot, FA flange, and TC trunnion brackets, plus CA, U, R, and CM back covers. The SDB pivot block is not available on this adjustable variant. Position sensing is ready out of the box thanks to the built-in magnet, which supports CMSG, DMSG, and EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X175-100S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 100 mm (usable range 75-175 mm), but it only trims the forward end and does not lock the mid-stroke. The -S suffix means a piston magnet is included for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X175-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.