Airtac MIJ Adjustable Cylinder MIJ16X175-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X175-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X175-10S
Dial in your forward end position on the fly with this stainless-steel round-body mini cylinder, which uses an external stop screw to shorten the extend stroke by up to 10 mm (yielding a usable 165-175 mm forward travel).
Built with a riveted stainless barrel and rod, the unit resists mild corrosion and handles washdown environments. It conforms to the ISO 6432 mounting interface for easy bracket drops, uses an M5×0.8 port, and carries the -S magnet for CMSG/DMSG/EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X175-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X175-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X175-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X175-10S Is Used
Staged Part Ejection
Use the 10 mm extend adjustment to fine-tune the pusher distance on a conveyor, precisely ejecting 5 kg cartons into a sorting lane without re-mounting the cylinder.
Tooling Changeover
Quickly adapt the 165-175 mm forward stop for different fixture heights on a machining line, absorbing setup tolerances with the external screw rather than adding shims.
Is the Airtac MIJ Adjustable Cylinder MIJ16X175-10S the Right Cylinder?
The integrated 10 mm stop screw is invaluable for taking up mechanical tolerances during setup, letting one part number cover several slightly different stop points without swapping hardware. Mounting options include LB foot, FA flange, and TC trunnion (the SDB pivot block is excluded on this adjustable variant).
Remember that the stop screw only trims the extend end position; it does not function as a mid-stroke lock. If your application must hold a load vertically upon air loss, the piston will drift, so you must add an external rod lock or pilot check valve. The -S magnet enables position sensing with CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X175-10S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa. This bore size uses an M5×0.8 port and a Ø6 mm piston rod with an M6x1.0 male thread.
An external stop screw shortens the extend stroke by up to 10 mm on-site, allowing you to set the exact forward end position without changing the cylinder; retract remains full stroke. The -S suffix means it has a built-in piston magnet for use with CMSG, DMSG, or EMSG sensors. It uses fixed TPU bumper pads, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X175-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.