Airtac MIJ Adjustable Cylinder MIJ16X20-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X20-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 20mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke20 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X20-10S
Dial in a precise forward end position on-site with the AirTAC MIJ16X20-10S, a round-body stainless steel mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 20 mm nominal length down to 10 mm without changing parts, while the retract stroke remains full. Built with a riveted stainless barrel and piston rod, it handles mild washdown environments and conforms to the ISO 6432 mounting interface for Ø16 bores.
The integrated piston magnet (-S) supports CMSG, DMSG, and EMSG sensors for position confirmation.
Airtac MIJ Adjustable Cylinder MIJ16X20-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X20-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 20 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X20-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X20-10S Is Used
Staged Part Feeding
Trim the extend stroke on-site to push 5.1 kg packages smoothly into a staging lane, taking up mechanical tolerances as guide rails wear.
Light Clamping Stops
Fine-tune the forward end position to clamp fragile plastic housings gently, relying on the fixed TPU bumpers to soften the final impact.
Is the Airtac MIJ Adjustable Cylinder MIJ16X20-10S the Right Cylinder?
The 16 mm bore hits a versatile middle ground, and the 10 mm external stop screw is ideal for taking up mechanical tolerances during changeovers. Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available on this adjustable variant).
Remember that the stop screw sets the end position but does not function as a mid-stroke lock. If air pressure drops, the piston will drift; to hold a vertical load securely, add an external rod lock or pilot-operated check valve. Position sensing requires the -S magnet option included here to mount CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X20-10S FAQ
This 16 mm bore cylinder uses an M5×0.8 air port. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm on-site, giving a usable forward range of 10 to 20 mm; the retract stroke remains full. The -S suffix means a piston magnet is built-in, allowing you to mount CMSG, DMSG, or EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X20-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.