Airtac MIJ Adjustable Cylinder MIJ16X200-20S
The AirTAC MIJ Adjustable Cylinder MIJ16X200-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X200-20S
Dial in a precise forward end position on-site with the AirTAC MIJ16X200-20S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw trims the extend stroke by up to 20 mm, letting you cover multiple stop distances with a single part number while the retract stroke remains full. The stainless barrel and rod resist mild corrosion and washdown environments.
Fixed TPU bumper pads decelerate the piston at the stroke ends, and the included -S magnet enables position sensing with CMSG, DMSG, or EMSG switches.
Airtac MIJ Adjustable Cylinder MIJ16X200-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X200-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X200-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X200-20S Is Used
Tolerance Take-Up Jig
Fine-tune the forward stroke on assembly jigs to compensate for material thickness variations, dialing in the exact 180-200 mm extend position on-site via the external screw.
Changeover Sorting Gate
Quickly reposition a diverter gate for different product runs by trimming the extend end, using the built-in -S magnet and DMSG sensor to confirm the adjusted forward endpoint.
Is the Airtac MIJ Adjustable Cylinder MIJ16X200-20S the Right Cylinder?
The 20 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds without machining new hard stops. Mount using LB foot, FA flange, or TC trunnion brackets—note the SDB pivot block is not available on this adjustable variant.
Remember that the stop screw sets the end position but acts purely as a mechanical limit, not a mid-stroke lock. If your application must hold a vertical load on air loss, the piston will drift; add an external rod lock or pilot-operated check valve for secure holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X200-20S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
The external stop screw shortens the extend stroke by up to 20 mm (usable extend 180-200 mm) for on-site tuning; retract remains full. The -S suffix means it has a built-in piston magnet for CMSG/DMSG/EMSG sensors. Fixed TPU bumpers decelerate the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X200-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.