Airtac MIJ Adjustable Cylinder MIJ16X200-30S
The AirTAC MIJ Adjustable Cylinder MIJ16X200-30S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X200-30S
Dial in a precise forward end position on-site with the AirTAC MIJ16X200-30S, a round-body stainless steel mini cylinder featuring a 30 mm external stop screw that shortens the extend stroke from its 200 mm nominal maximum down to 170 mm. Because the adjuster trims the forward end only, the retract stroke remains full, letting you cover multiple stop distances with a single part number during setup or tolerance take-up.
The stainless barrel and rod resist mild corrosion and washdown environments, while the M5×0.8 port and M6x1.0 male rod thread ensure straightforward integration into standard mini brackets.
Airtac MIJ Adjustable Cylinder MIJ16X200-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X200-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X200-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X200-30S Is Used
Staged Parts Ejection
Pushes lightweight plastic components off a belt at varied distances. The 30 mm stop screw adjusts the extend endpoint for different product widths without changing the cylinder.
Tooling Changeover Stops
Operators dial in the exact 170 to 200 mm forward position during machine setup to take up mechanical tolerances.
Carton Flap Folding
Folds light cardboard flaps prior to sealing. The stainless build handles mild washdown, while the external stop nut accommodates different box depths on the fly.
Is the Airtac MIJ Adjustable Cylinder MIJ16X200-30S the Right Cylinder?
The external screw is strictly an end-position setter, not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve if you need to hold a suspended load.
This -S variant includes a built-in piston magnet for CMSG, DMSG, or EMSG position sensing. Mounting options include LB foot, FA flange, and TC trunnion brackets, plus CA, U, R, or CM back covers. Note that the SDB pivot block is not available on this adjustable-stroke series, and deceleration relies on fixed TPU bumper pads rather than an adjustable air cushion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X200-30S FAQ
At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm, letting you set the forward end position between 170 mm and 200 mm; the retract stroke remains fixed at 200 mm. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.