Airtac MIJ Adjustable Cylinder MIJ16X225-20
The AirTAC MIJ Adjustable Cylinder MIJ16X225-20 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 225mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke225 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X225-20
Dial in a precise forward end position without swapping hardware using the AirTAC MIJ16X225-20, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 20 mm on site, yielding a usable forward travel of 205 to 225 mm while retract remains full.
Conforming to the ISO 6432 mounting interface, this 16 mm bore unit drops directly into standard mini brackets and clevises. Fixed TPU bumper pads decelerate the stroke end across the 30-800 mm/s speed range. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without upgrading to the -S variant.
Airtac MIJ Adjustable Cylinder MIJ16X225-20 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X225-20 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X225-20
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X225-20 Is Used
Clamp Tolerance Take-Up
Absorb fixture machining variances on the fly. The external screw lets you set the precise 205-225 mm forward clamp position for a 6 kg workpiece without machining new stops.
Staged Parts Feeder
Push lightweight components out of a chute at 0.5 MPa. The on-site adjustability allows operators to shift the discharge point for different carton sizes in seconds.
Is the Airtac MIJ Adjustable Cylinder MIJ16X225-20 the Right Cylinder?
The integrated adjuster is invaluable for taking up mechanical tolerances or covering multiple stop points in a changeover fixture with one part number. Remember the stop screw only trims the extend end; it is not a mid-stroke lock. Because a standard cylinder drifts on air loss, add an external rod lock or pilot check valve if the load must be held. Mounting choices include LB foot, FA flange and TC trunnion (SDB is unavailable here), with back covers CA, U, R or CM.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X225-20 FAQ
This 16 mm bore cylinder features an M5×0.8 port and a Ø6 mm rod. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 20 mm (usable forward travel 205-225 mm); retract remains full. This screw sets the end position but is not a mid-stroke lock. The cylinder will drift on air loss, so use an external rod lock for holding. This non-S SKU also lacks a magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X225-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.