Airtac MIJ Adjustable Cylinder MIJ16X225-30
The AirTAC MIJ Adjustable Cylinder MIJ16X225-30 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 225mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke225 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X225-30
Dial in your forward end position on the fly with the AirTAC MIJ16X225-30, a double-acting round-body mini cylinder built with a stainless-steel barrel and piston rod for mild washdown resistance. An external stop screw lets you trim the extend stroke by up to 30 mm on site, giving a usable forward range of 195 to 225 mm without changing the part number. Retract travel remains at the full 225 mm.
The body uses the ISO 6432 mounting interface for standard mini brackets, ports via M5×0.8 thread, and relies on fixed TPU bumper pads to decelerate the stroke end. Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X225-30 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X225-30 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X225-30
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X225-30 Is Used
Tolerance Take-Up Stop
Feeds a 5 kg subassembly into a machining fixture, using the external screw to fine-tune the 195 to 225 mm forward stop and absorb fixture variances.
Adjustable Divert Gate
Acts as a pneumatic deflector on a packaging line, where the stainless rod resists humidity and the stop nut sets the exact gate angle for each box size.
Is the Airtac MIJ Adjustable Cylinder MIJ16X225-30 the Right Cylinder?
The 30 mm external adjuster is ideal for taking up mechanical tolerances during setup or covering multiple staged feed positions from one assembly.
Remember the stop screw sets the forward end position but acts purely as a bumper; it is not a mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve if you must hold a suspended load. Mount using LB foot, FA flange or TC trunnion brackets (SDB pivot blocks are not offered on this adjustable variant), and select the -S magnet version if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X225-30 FAQ
The external stop screw shortens the extend stroke by up to 30 mm (retract stays full). This SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors; order the -S variant for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X225-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.