Airtac MIJ Adjustable Cylinder MIJ16X225-40
The AirTAC MIJ Adjustable Cylinder MIJ16X225-40 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 225mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke225 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X225-40
Dial in your exact forward end position on-site with the AirTAC MIJ16X225-40, a round-body stainless-steel mini cylinder featuring a 40mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke anywhere from the 225mm nominal maximum down to 185mm, absorbing setup tolerances without swapping hardware. The retract stroke remains full length.
It uses fixed TPU bumper pads to soften stroke ends and ports directly via M5×0.8 thread.
Airtac MIJ Adjustable Cylinder MIJ16X225-40 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X225-40 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X225-40
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X225-40 Is Used
Tolerance Take-Up Jig
Absorb mechanical setup variations in a machining fixture by trimming the extend end position on-site, ensuring a consistent 60N holding force without retooling.
Adjustable Stop Gate
Act as a physical stop for lightweight pallets, dialing the forward stroke down from 225mm to accommodate different product lengths on demand.
Is the Airtac MIJ Adjustable Cylinder MIJ16X225-40 the Right Cylinder?
The 40mm external adjuster is ideal for changeover jobs where you need one part number to cover several staged feed positions.
Remember the stop screw only sets the forward end position; it is not a mid-stroke lock. If air pressure drops, the piston drifts, so add an external pilot check valve for load holding. Mount via LB foot, FA flange or TC trunnion (SDB pivot-block is not available). Because this SKU lacks the -S magnet, it cannot accept CMSG/DMSG/EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X225-40 FAQ
Its theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 40mm (usable range 185-225mm); the retract stroke remains full. This SKU has no magnet and cannot take sensors, but choosing the -S variant enables CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X225-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.