Airtac MIJ Adjustable Cylinder MIJ16X225-75
The AirTAC MIJ Adjustable Cylinder MIJ16X225-75 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 225mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke225 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X225-75
Trimming the forward end by up to 75 mm via an external stop screw, this double-acting round-body mini cylinder lets you dial in exact extend positions from 150 to 225 mm without changing hardware. The stainless-steel barrel and Ø6 mm piston rod resist mild corrosion and washdown, while the retract stroke remains full length. It conforms to the ISO 6432 mounting interface for easy bracket drops.
Fixed TPU bumpers decelerate the stroke ends, and because this SKU lacks the -S magnet, it cannot host CMSG/DMSG/EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X225-75 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X225-75 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X225-75
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X225-75 Is Used
Tolerance Take-Up Stop
Acts as a hard mechanical stop for machining fixtures, trimming the extend position to absorb part tolerances without reprogramming a PLC.
Adjustable Divert Gate
Swings a sorting gate for small cartons; the external screw fine-tunes the reach to handle different product families during line changeovers.
Is the Airtac MIJ Adjustable Cylinder MIJ16X225-75 the Right Cylinder?
If you need less push, the smaller Ø12 MIJ bore yields 56.5 N at 0.5 MPa; stepping up to the Ø20 MIJ provides 157.0 N. The 75 mm adjustment window here is ideal for taking up mechanical tolerances or staging feeds across changeover jobs, letting one part number cover several intermediate stops. Remember the stop screw only sets the extend endpoint—it is not a mid-stroke lock, so fit an external rod lock or pilot check valve if you must hold a load on air loss.
Mounting options include LB foot, FA flange, and TC trunnion brackets, plus CA, U, R, and CM back covers, but the SDB pivot block is not available on this adjustable variant. To add position sensing, select the -S magnet version instead of this non-magnet SKU.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X225-75 FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa. The air port is M5×0.8 and the male rod thread is M6x1.0.
An external stop screw shortens the extend stroke by up to 75 mm on site, giving a usable forward range of 150-225 mm; retract remains full. The screw sets the end position but is not a mid-stroke lock, so the piston will drift on air loss. This non-S SKU also lacks a magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X225-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.