Airtac MIJ Adjustable Cylinder MIJ16X35-30S
The AirTAC MIJ Adjustable Cylinder MIJ16X35-30S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 35mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X35-30S
Dial in a precise forward end position on the floor with the AirTAC MIJ16X35-30S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw trims the extend stroke by up to 30 mm, letting you cover multiple stop distances with one part number while the retract stroke remains full.
The riveted stainless barrel and rod shrug off mild washdown environments. Because this SKU carries the -S magnet, it is ready for CMSG, DMSG or EMSG switches, and the M5×0.8 port matches the ISO 6432 mounting interface for standard mini brackets.
Airtac MIJ Adjustable Cylinder MIJ16X35-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X35-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X35-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X35-30S Is Used
Staged Diverting
Extend a 5.1 kg package gate to varying lengths on the fly, using the stop screw to change the divert distance for different carton sizes.
Light Press Assembly
Drive a 16 mm bore pin insertion tool, relying on the adjustable forward stop to control insertion depth precisely across multiple batch runs.
Is the Airtac MIJ Adjustable Cylinder MIJ16X35-30S the Right Cylinder?
The 30 mm adjustment window is ideal for taking up mechanical tolerances during setup without machining new hard stops.
Remember that the external screw only sets the extend end position; it is not a mid-stroke lock. If your application must hold a vertical load on air loss, add an external rod lock or pilot check valve. For mounting, select LB foot, FA flange or TC trunnion brackets, noting that SDB pivot blocks are not offered on adjustable-stroke variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X35-30S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa, and the air port size is M5×0.8.
An external stop screw shortens the extend stroke by up to 30 mm, allowing you to set the forward end position on-site while the retract stroke remains full. The built-in -S magnet enables position sensing with CMSG, DMSG or EMSG switches, and the stainless steel build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X35-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.