Airtac MIJ Adjustable Cylinder MIJ16X40-10
The AirTAC MIJ Adjustable Cylinder MIJ16X40-10 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 40mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke40 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X40-10
Dial in your forward end position on-site with the AirTAC MIJ16X40-10, a round-body stainless-steel mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 40 mm nominal length down to 30 mm, absorbing setup tolerances without changing the cylinder. Retract remains at full length, and the screw acts only as an end stop, not a mid-stroke lock.
Built with a stainless barrel and rod for mild washdown resistance, this double-acting actuator conforms to the ISO 6432 mounting interface for easy bracket drops. It uses an M5×0.8 port, fixed TPU bumper pads for end deceleration, and because this SKU lacks the -S magnet, it cannot accept position sensors.
Airtac MIJ Adjustable Cylinder MIJ16X40-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X40-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 40 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X40-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X40-10 Is Used
Tolerance Take-Up Gauging
Use the 10 mm extend stop to fine-tune the forward contact position on the fly, absorbing part tolerances during inline gauging with a safe 60 N working load.
Light Clamping Changeover
Dial in the exact 30 to 40 mm extend reach for different fixture heights on a machining cell, taking advantage of the stainless build for mild coolant splash.
Is the Airtac MIJ Adjustable Cylinder MIJ16X40-10 the Right Cylinder?
The 10 mm external adjuster is ideal for changeover jobs where you need one part number to cover several forward stops. Mount using LB foot, FA flange, or TC trunnion brackets (the SDB pivot block is not available on this adjustable variant). Remember that the piston drifts on air loss, so fit an external pilot check valve if the load must hold position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X40-10 FAQ
An external stop screw shortens the extend stroke by up to 10 mm on-site, while retract stays full. This SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors; you need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X40-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.