Airtac MIJ Adjustable Cylinder MIJ16X40-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X40-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 40mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke40 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X40-10S
Dial in your forward end position on-site with the AirTAC MIJ16X40-10S, a round-body stainless steel mini cylinder featuring a 10mm adjustable extend window. An external stop screw lets you shorten the forward stroke from its 40mm nominal length down to 30mm, absorbing setup tolerances without changing the cylinder body. Retract remains at the full 40mm.
This double-acting actuator conforms to the ISO 6432 mounting interface for seamless bracket drops, and the included -S piston magnet supports CMSG, DMSG, and EMSG sensors. It uses fixed TPU bumper pads to decelerate the stroke end. The M5×0.8 port and M6x1.0 male rod thread provide standard pneumatic connections.
Airtac MIJ Adjustable Cylinder MIJ16X40-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X40-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 40 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X40-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X40-10S Is Used
Package Diverting Gates
Actuates a lightweight routing flap on a conveyor; the external stop screw fine-tunes the gate angle without requiring multiple cylinder lengths.
Is the Airtac MIJ Adjustable Cylinder MIJ16X40-10S the Right Cylinder?
The 10mm external stop screw is ideal for taking up mechanical tolerances during changeovers, letting one part number cover several intermediate stops. Mount using LB foot, FA flange, or TC trunnion hardware, plus CA, U, R, or CM back covers (SDB pivot blocks are not available on this adjustable variant). Because the stop screw only sets the end position and is not a mid-stroke lock, expect piston drift on air loss; add an external rod lock or pilot check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X40-10S FAQ
The theoretical maximum force is 20.5kgf at 1.0MPa.
The external stop screw shortens the extend stroke by up to 10mm (usable range 30-40mm) to set the forward end position, while retract remains full stroke. The -S suffix indicates a built-in piston magnet for CMSG/DMSG/EMSG sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X40-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.