Airtac MIJ Adjustable Cylinder MIJ16X45-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X45-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 45mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke45 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X45-10S
Trim the forward end position by up to 10 mm on site with the external stop screw, dialing in a precise 35 to 45 mm extend without changing the cylinder.
The stainless barrel and rod resist mild corrosion and washdown environments. It conforms to the ISO 6432 mounting interface for standard mini brackets and uses an M5×0.8 port. Fixed TPU bumper pads decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ16X45-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X45-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X45-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X45-10S Is Used
Precision Gauging Stop
Dial in the 10 mm extend window to position a part for measurement, absorbing fixture tolerances with a reliable 60 N working force.
Staged Feed Diverter
Tune the forward stop on the fly to alter the push-off distance for different product lengths without swapping hardware.
Light Carton Sealing
Apply consistent forward pressure on light packaging flaps; the stainless build handles mildly humid plant environments.
Is the Airtac MIJ Adjustable Cylinder MIJ16X45-10S the Right Cylinder?
If your setup needs less push, the smaller Ø12 MIJ bore provides 56.5 N at 0.5 MPa; if you need more power, stepping up to the Ø20 MIJ yields 157.0 N. The 10 mm adjuster window is ideal for taking up mechanical tolerances during changeovers. The external screw sets the forward stop only and does not lock the piston mid-stroke. Because a plain cylinder drifts on air loss, use an external rod lock or pilot check valve to hold a load. Mount via LB, FA, or TC brackets (SDB is unavailable here), and use CMSG, DMSG, or EMSG sensors since this -S SKU has a magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X45-10S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical max force is 20.5 kgf at 1.0 MPa. It uses an M5×0.8 port.
An external stop screw shortens the extend stroke by up to 10 mm, setting the exact forward end position while retract remains full. The -S suffix means a magnet is built in for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X45-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.