Airtac MIJ Adjustable Cylinder MIJ16X50-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X50-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X50-10S
Trim the forward end position by up to 10 mm on-site with the external stop screw on this stainless-steel round-body mini cylinder.
Built with a Ø6 mm piston rod and an M5×0.8 port, the unit conforms to ISO 6432 mounting dimensions for easy bracket drops. The -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG sensors, while fixed TPU bumpers decelerate the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ16X50-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X50-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X50-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X50-10S Is Used
Light Duty Ejectors
Eject small machined parts on demand by trimming the extend stop to match fixture depth, preventing over-travel with the 5.1 kg lift capacity.
Is the Airtac MIJ Adjustable Cylinder MIJ16X50-10S the Right Cylinder?
This Ø16 model hits a solid middle ground, and the 10 mm extend adjustment window lets you dial in the exact 40-50 mm forward stop to absorb mechanical tolerances during setup.
Note that the stop screw only sets the end position; it is not a mid-stroke lock, and the piston will drift if air pressure is lost. For load holding, install an external rod lock or pilot check valve. Mounting options include LB, FA, and TC (SDB is unavailable here), and the -S magnet enables position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X50-10S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa, and the air port is M5×0.8.
An external stop screw shortens the extend stroke by up to 10 mm on-site, giving a usable 40-50 mm forward range while retract remains full. The -S suffix denotes a built-in piston magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X50-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.