Airtac MIJ Adjustable Cylinder MIJ16X60-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X60-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X60-10S
Dial in a precise forward end position on-site with the AirTAC MIJ16X60-10S, a double-acting round-body mini cylinder featuring a 10mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel from the 60mm nominal maximum down to 50mm, absorbing setup tolerances without swapping hardware. The retract stroke remains full length. Built with a stainless-steel barrel and Ø6mm piston rod, this riveted construction handles mild washdown environments and uses the ISO 6432 mounting interface for standard mini brackets.
This -S variant includes a piston magnet for CMSG, DMSG, or EMSG position sensing. Pneumatic supply connects via an M5×0.8 port, operating at 30-800mm/s with fixed TPU bumper pads decelerating the stroke ends.
Airtac MIJ Adjustable Cylinder MIJ16X60-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X60-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X60-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X60-10S Is Used
Gauge Position Trimming
Use the 10mm extend adjustment to fine-tune a mechanical gauge stop on a test fixture, absorbing part tolerances while applying a safe 60N working load.
Staged Part Feeding
Push lightweight components varying distances down a belt line by dialing the forward end position between 50mm and 60mm without changing cylinder hardware.
Carton Flap Folding
Set the exact extend length to fold varying box flaps, relying on the stainless rod construction for resistance in mildly humid packaging areas.
Is the Airtac MIJ Adjustable Cylinder MIJ16X60-10S the Right Cylinder?
When sizing this 16mm bore, dropping to the MIJ12 drops the 0.5MPa push force to 56.5N, while stepping up to the MIJ20 raises it to 157.0N. The 10mm external adjuster is ideal for changeover jobs where you need one part number to cover several slightly different forward stops. Mount using LB foot, FA flange, or TC trunnion brackets (the SDB pivot block is not offered on this adjustable variant). Remember the stop screw only sets the end position; it is not a mid-stroke lock. The piston will drift on air loss, so specify an external rod lock or pilot check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X60-10S FAQ
This 16mm bore cylinder uses an M5×0.8 port and a M6x1.0 male rod thread. The theoretical maximum force is 20.5kgf at 1.0MPa.
An external stop screw shortens the extend stroke by up to 10mm on-site, but the retract stroke remains full length. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Fixed TPU bumper pads absorb end impacts; it is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.