Airtac MIJ Adjustable Cylinder MIJ16X60-20
The AirTAC MIJ Adjustable Cylinder MIJ16X60-20 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X60-20
Dial in a precise forward end position on the fly with the AirTAC MIJ16X60-20, a double-acting round-body mini cylinder built with a stainless-steel barrel and piston rod for mild washdown resistance. An external stop screw lets you shorten the extend stroke by up to 20 mm on site, turning the 60 mm nominal travel into a 40-60 mm usable window without changing the cylinder. Retract remains at the full 60 mm.
It uses an M5×0.8 port, a Ø6 mm rod with an M6x1.0 male thread, and conforms to the ISO 6432 mounting interface for easy bracket drops. This non-magnet SKU cannot host a sensor; adding the -S variant enables CMSG/DMSG/EMSG switches.
Airtac MIJ Adjustable Cylinder MIJ16X60-20 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X60-20 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X60-20
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X60-20 Is Used
Staged Part Feeding
Dial the forward position on the fly for changeovers between similar product sizes, using the M5×0.8 ported actuator to push lightweight items at a safe 60 N working load.
Light Clamping Fixtures
Securely hold delicate components using the stainless steel round-body build, fine-tuning the clamp reach within a 40-60 mm window to prevent over-travel.
Is the Airtac MIJ Adjustable Cylinder MIJ16X60-20 the Right Cylinder?
If you need less push, the Ø12 MIJ bore yields 56.5 N at 0.5 MPa, while stepping up to the Ø20 MIJ provides 157.0 N for heavier stops. The 20 mm adjustment window here is ideal for taking up mechanical tolerances or staging feeds, letting one part number cover several intermediate positions. Remember the stop screw sets the end position but acts as no mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a load.
Mounting options include LB foot, FA flange, and TC trunnion, plus CA, U, R, or CM back covers, though the SDB pivot block is not offered on this adjustable variant. Fixed TPU bumper pads decelerate the stroke ends across the 30-800 mm/s speed range, keeping operation smooth without adjustable air cushions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X60-20 FAQ
This Ø16 bore cylinder uses an M5×0.8 air port. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 20 mm, giving a 40-60 mm usable forward window while retract stays at the full 60 mm. This SKU lacks a magnet and cannot take a sensor; you must specify the -S variant to use CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X60-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.