Airtac MIJ Adjustable Cylinder MIJ16X60-20S
The AirTAC MIJ Adjustable Cylinder MIJ16X60-20S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X60-20S
Dial in a precise forward end position on-site with the AirTAC MIJ16X60-20S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 20 mm, yielding a usable forward range of 40 to 60 mm while keeping full retract. This on-site tuning absorbs assembly tolerances and lets one part number cover several stop distances without swapping hardware.
The riveted stainless barrel and Ø6 mm rod resist mild washdown corrosion, and the built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors. It conforms to ISO 6432 mounting dimensions and uses an M5×0.8 port.
Airtac MIJ Adjustable Cylinder MIJ16X60-20S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X60-20S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X60-20S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X60-20S Is Used
Variable Length Gauging
Use the 20 mm extend adjustment to fine-tune the contact point on a 60 N inspection probe, accommodating different part heights without changing the cylinder.
Adjustable Transfer Stop
Set the exact stop position for mixed-product conveyor lines, trimming the extend stroke on the fly to stage cartons precisely within the 5.1 kg lift capacity.
Is the Airtac MIJ Adjustable Cylinder MIJ16X60-20S the Right Cylinder?
The 20 mm external adjuster is ideal for taking up mechanical tolerances during setup. Remember that the stop screw only sets the end position; it is not a mid-stroke lock, and the piston will drift on air loss, so add an external pilot check valve for held loads. You can use LB, FA, or TC mounts (SDB is excluded here), and the -S magnet enables position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X60-20S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa. This Ø16 bore uses an M5×0.8 air port and a Ø6 mm rod.
The external stop screw shortens the extend stroke by up to 20 mm (usable range 40-60 mm); retract remains full. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors. It uses fixed TPU bumper pads, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X60-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.