Airtac MIJ Adjustable Cylinder MIJ16X60-40S
The AirTAC MIJ Adjustable Cylinder MIJ16X60-40S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X60-40S
Dial in your forward end position on the fly with the AirTAC MIJ16X60-40S, a round-body stainless steel mini cylinder that cuts its 60 mm extend stroke by up to 40 mm via an external stop screw. Because the adjuster trims only the extend end, the retract stroke remains full.
Built with a riveted stainless barrel and rod, it handles mild washdowns and corrosion risks seamlessly. The 16 mm bore uses an M5×0.8 port and an M6x1.0 male rod thread. As a magnet-equipped (-S) ISO 6432 mounting interface unit, it accepts CMSG, DMSG, or EMSG sensors, while fixed TPU bumper pads absorb end-of-travel impacts.
Airtac MIJ Adjustable Cylinder MIJ16X60-40S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X60-40S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X60-40S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X60-40S Is Used
Staged Part Ejection
Sequence the ejection of light components from a fixture by fine-tuning the extend end position on site, relying on the stainless build for mild shop coolant splashes.
Is the Airtac MIJ Adjustable Cylinder MIJ16X60-40S the Right Cylinder?
The Ø16 hits a sweet spot at 100.5 N. The 40 mm adjustment window is perfect for taking up mechanical tolerances or staging feeds across changeovers without swapping hardware. Remember that the stop screw sets the end position but acts purely as a bumper; it is not a mid-stroke lock, and the piston will drift on air loss. For suspended loads, install an external rod lock or pilot check valve.
Mounting options include LB foot, FA flange, and TC trunnion brackets, plus CA, U, R, or CM back covers (SDB pivot blocks are excluded on this adjustable variant). The -S magnet enables position sensing, operating at 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X60-40S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa. This 16 mm bore cylinder features an M5×0.8 air port and a Ø6 mm rod with an M6x1.0 male thread.
An external stop screw shortens the extend stroke by up to 40 mm on site, giving a usable forward range of 20-60 mm, while retract remains full. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors. The screw only sets the end position; it does not lock the load mid-stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X60-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.