Airtac MIJ Adjustable Cylinder MIJ16X60-50
The AirTAC MIJ Adjustable Cylinder MIJ16X60-50 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X60-50
Dial in a precise forward end position on-site with the AirTAC MIJ16X60-50, a double-acting round-body mini cylinder featuring a 50 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel from its 60 mm nominal length down to 10 mm, absorbing setup tolerances without swapping hardware. The retract stroke remains full length. Built with a stainless-steel barrel and Ø6 mm piston rod, it handles mild washdown environments and drops directly into ISO 6432 standard mini-cylinder brackets.
Air connects via an M5×0.8 port, and internal fixed TPU bumper pads decelerate the piston at the stroke ends. Note this specific SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ16X60-50 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X60-50 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X60-50
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X60-50 Is Used
Variable Length Stops
Trim the extend stroke up to 50 mm to push parts of differing widths against a fixture without retooling the entire station.
Is the Airtac MIJ Adjustable Cylinder MIJ16X60-50 the Right Cylinder?
The 50 mm external adjuster is ideal for changeover jobs where one cylinder must cover multiple part lengths, letting you trim the extend end precisely. Remember the stop screw only sets the forward position—it is not a mid-stroke lock. The piston will drift on air loss, so fit an external pilot check valve for suspended loads. Mount using LB foot, FA flange, or TC trunnion brackets (the SDB pivot block is unavailable for this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X60-50 FAQ
This 16 mm bore cylinder uses an M5×0.8 air port and a M6x1.0 male rod thread. At 0.5 MPa it pushes with 100.5 N and pulls with 86.4 N. At 0.7 MPa push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50 mm on-site, giving a usable forward travel of 10 to 60 mm; the retract stroke remains fixed at 60 mm. This SKU has no magnet and cannot accept CMSG/DMSG/EMSG sensors. The stainless build resists mild corrosion, and fixed TPU bumpers absorb end impacts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X60-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.