Airtac MIJ Adjustable Cylinder MIJ16X65-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X65-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 65mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke65 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X65-10S
Dial in a precise forward end position on the fly with the AirTAC MIJ16X65-10S, a double-acting round-body mini cylinder built with a stainless-steel barrel and piston rod for mild washdown resistance. An external stop screw lets you shorten the extend stroke by up to 10 mm on site, giving a usable forward range of 55 to 65 mm without swapping parts. Retract remains at the full 65 mm. Because this Ø16 bore conforms to the ISO 6432 mounting interface, it drops directly into standard mini brackets and clevises.
The M5×0.8 port and M6x1.0 male rod thread handle the air and linkage requirements, while the fixed TPU bumper pads decelerate the piston at the stroke ends. Equipped with a piston magnet (-S), it is ready for CMSG, DMSG, or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ16X65-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X65-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 65 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X65-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X65-10S Is Used
Gauge Tolerance Take-Up
Use the 10 mm extend adjustment to compensate for part variance in small clamping jigs, ensuring consistent 60 N contact pressure without machining custom spacers.
Sensor-Ready Sorting
Leverage the -S magnet with DMSG switches to confirm part ejection, dialing the stop screw in 1 mm increments to handle multiple product families on one line.
Is the Airtac MIJ Adjustable Cylinder MIJ16X65-10S the Right Cylinder?
The 10 mm external stop screw is ideal for taking up mechanical tolerances or matching multiple part stops during setup, but remember it only trims the extend end and acts as a bumper, not a mid-stroke lock. If your application must hold a load vertically on air loss, the piston will drift, so you will need an external rod lock or pilot-operated check valve.
For mounting, select from LB foot, FA flange, or TC trunnion styles; note that the SDB pivot block is not available on this adjustable-stroke variant. The built-in magnet (-S) enables reed or electronic sensors, running at speeds of 30-800 mm/s across a 0.15-1.0 MPa operating pressure range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X65-10S FAQ
An external screw shortens the extend stroke by up to 10 mm (usable range 55-65 mm), while retract stays at the full 65 mm; the -S suffix indicates a built-in piston magnet for CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X65-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.