Airtac MIJ Adjustable Cylinder MIJ16X70-30S
The AirTAC MIJ Adjustable Cylinder MIJ16X70-30S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 70mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke70 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X70-30S
Dial in your forward end position on the fly with the AirTAC MIJ16X70-30S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 30 mm on site, providing a usable forward range of 40 to 70 mm without swapping parts. Retract remains at the full 70 mm. The stainless barrel and piston rod supply mild corrosion and washdown resistance, while the M5×0.8 port and M6x1.0 male rod thread drop directly into standard ISO 6432 mini-cylinder mounting interfaces.
Fixed TPU bumper pads decelerate the piston at the stroke ends, operating at speeds from 30 to 800 mm/s. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ16X70-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X70-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X70-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X70-30S Is Used
Adjustable Stop Dosing
Fine-tune the extend stroke by up to 30 mm to dial in exact shot sizes or dispense volumes without machining new hard stops.
Tolerance Take-Up Press
Absorb part-to-part dimensional variance in a light assembly press by trimming the forward end position within the 40-70 mm range.
Is the Airtac MIJ Adjustable Cylinder MIJ16X70-30S the Right Cylinder?
The 30 mm adjustment window is ideal for taking up mechanical tolerances or staging feeds during setup, letting one part number cover several intermediate stops. You can mount via LB foot, FA flange, or TC trunnion, but note the SDB pivot-block is not available on this adjustable variant.
Remember that the stop screw sets the end position but acts purely as a mechanical stop, not a mid-stroke lock. The cylinder will drift on air loss or when a valve is centered, so you must use an external rod lock or pilot-operated check valve to hold a suspended load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X70-30S FAQ
The theoretical maximum force at 1.0 MPa is 20.5 kgf.
The external stop screw shortens the extend stroke by up to 30 mm, setting the forward end position without affecting the full retract. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Fixed TPU bumpers cushion the stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X70-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.