Airtac MIJ Adjustable Cylinder MIJ16X75-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X75-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X75-10S
Dial in a precise forward end position on-site with the AirTAC MIJ16X75-10S, a round-body stainless steel mini cylinder. An external stop screw lets you shorten the extend stroke by up to 10 mm, providing a usable forward range of 65 to 75 mm without changing the unit. Retract remains at the full 75 mm.
The riveted stainless barrel and Ø6 mm rod resist mild corrosion and washdown environments. It uses the ISO 6432 mounting interface for standard mini brackets and includes a built-in magnet (-S) for CMSG, DMSG, or EMSG sensors. The M5×0.8 port and fixed TPU bumper pads ensure reliable operation across speeds of 30 to 800 mm/s.
Airtac MIJ Adjustable Cylinder MIJ16X75-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X75-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X75-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X75-10S Is Used
Tolerance Take-Up Gauging
Use the 10 mm extend adjustment to compensate for part variance in a gauging station, applying up to 60 N of safe contact force to verify dimensions accurately.
Staged Feed Positioning
Fine-tune the forward stop on a conveyor diverter to push mixed-size cartons into different lanes without swapping actuators for each format changeover.
Is the Airtac MIJ Adjustable Cylinder MIJ16X75-10S the Right Cylinder?
The 10 mm external adjuster is invaluable for taking up mechanical tolerances during setup or staging feeds, letting one part number cover several intermediate stops. Mount using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers (SDB pivot blocks are not offered on this adjustable variant). Because the stop screw only trims the extend end and is not a mid-stroke lock, the piston will drift on air loss; add an external rod lock or pilot check valve if you must hold a load vertically.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X75-10S FAQ
An external stop screw shortens the extend stroke by up to 10 mm on-site (retract remains full), but it is not a mid-stroke lock. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.