Airtac MIJ Adjustable Cylinder MIJ16X75-30
The AirTAC MIJ Adjustable Cylinder MIJ16X75-30 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X75-30
Dial in your exact forward end position on-site with the AirTAC MIJ16X75-30, a round-body stainless-steel mini cylinder featuring a 30mm extend-stroke adjustment window. Rather than swapping components to hit a new stop, an external screw trims the forward travel down from the 75mm nominal maximum, while the retract stroke remains full length.
Built with a stainless barrel and piston rod, this riveted construction handles mild corrosion and washdown environments. The Ø16 bore uses an M5×0.8 port, a Ø6 mm rod, and conforms to ISO 6432 mounting interface dimensions for standard mini brackets. This SKU lacks a magnet, so it cannot accept CMSG/DMSG/EMSG sensors without upgrading to the -S variant.
Airtac MIJ Adjustable Cylinder MIJ16X75-30 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X75-30 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X75-30
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X75-30 Is Used
Staged Part Feeding
Dial the external screw to shorten the extend position when diverting varying product sizes on a line, ensuring precise placement without changing the cylinder.
Washdown Sorting Gates
Leverage the stainless steel construction and M5×0.8 port in food packaging lines, adjusting the stroke end on the fly to route lightweight cartons safely.
Is the Airtac MIJ Adjustable Cylinder MIJ16X75-30 the Right Cylinder?
When sizing this 16 mm bore, dropping down to the MIJ12 lowers your 0.5 MPa push force to 56.5 N, whereas stepping up to the MIJ20 raises it to 157.0 N. The 30 mm external adjuster is ideal for taking up mechanical tolerances during setup or covering multiple stop positions with a single part number. Keep in mind the stop screw only sets the extend end position; it is not a mid-stroke lock. The cylinder will drift on air loss, so use an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable for this adjustable type).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X75-30 FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm on-site, giving a usable forward range of 45-75 mm. The retract stroke remains full. This SKU has no magnet (-S required for sensors) and uses fixed TPU bumper pads for end deceleration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X75-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.