Airtac MIJ Adjustable Cylinder MIJ16X75-30S
The AirTAC MIJ Adjustable Cylinder MIJ16X75-30S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X75-30S
Dial in a precise forward end position on-site with the AirTAC MIJ16X75-30S, a round-body stainless-steel mini cylinder featuring a 30 mm adjustable extend window. An external stop screw lets you shorten the forward stroke from its 75 mm nominal length down to 45 mm, absorbing setup tolerances and consolidating part numbers without swapping hardware. Retract travel remains full length, and the adjuster strictly sets the end stop rather than locking mid-stroke.
The M5×0.8 port feeds air efficiently, and the included -S piston magnet supports CMSG, DMSG, and EMSG position switches.
Airtac MIJ Adjustable Cylinder MIJ16X75-30S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X75-30S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X75-30S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X75-30S Is Used
Adjustable Stop Gauging
Fine-tune the 30 mm extend window to set a precise 45 to 75 mm push depth for sensor probes or mechanical gauges, easily accommodating material thickness variations on the fly.
Variable Depth Sealing
Regulate the forward stroke of a light packaging press head to seal bags of varying fill heights, leveraging the 5.1 kg vertical lift capacity to safely clamp product covers.
Is the Airtac MIJ Adjustable Cylinder MIJ16X75-30S the Right Cylinder?
The 30 mm external adjuster is invaluable for prototype tooling or changeover jobs where the exact extend distance varies by a few millimeters. Remember that the stop screw simply trims the forward endpoint; it does not function as a mid-stroke lock or brake.
Mount this ISO 6432 mini cylinder using standard LB foot, FA flange, or TC trunnion brackets (SDB pivot blocks are not offered on this adjustable variant). Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for end-position confirmation. Note that fixed TPU bumper pads decelerate the stroke ends, but the piston will drift on air loss—specify an external rod lock or pilot check valve if you need to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X75-30S FAQ
This 16 mm bore cylinder uses an M5×0.8 air port and a M6x1.0 male rod thread. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm on-site, letting you set a precise forward end position while the retract stroke remains full length. The -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG reed or electronic sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X75-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.