Airtac MIJ Adjustable Cylinder MIJ16X75-40S
The AirTAC MIJ Adjustable Cylinder MIJ16X75-40S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X75-40S
Dial in a precise forward end position on-site with the AirTAC MIJ16X75-40S, a round-body stainless steel mini cylinder featuring a 40 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke anywhere from the 75 mm maximum down to 35 mm, absorbing setup tolerances without swapping hardware. Retract remains at the full stroke length.
Built with a riveted stainless barrel and piston rod, this unit handles mild washdown and corrosive environments while conforming to the ISO 6432 mounting interface for standard mini brackets. The -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG position sensing. Deceleration relies on fixed TPU bumper pads, as the stop screw governs the extend endpoint rather than acting as a mid-stroke lock. The M5×0.8 port and M6x1.0 male rod thread ensure straightforward integration.
Airtac MIJ Adjustable Cylinder MIJ16X75-40S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X75-40S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X75-40S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X75-40S Is Used
Tooling Changeover
Adapts a single cylinder to multiple fixture heights on a machining station by adjusting the forward end position up to 40 mm, saving setup time between product runs.
Carton Flap Folding
Folds varying box flap heights on a packaging line by dialing in the extend stroke, using the fixed TPU bumpers to cushion the final 5.1 kg load impact.
Is the Airtac MIJ Adjustable Cylinder MIJ16X75-40S the Right Cylinder?
The 40 mm external adjuster is ideal for changeover jobs where one part number must cover multiple forward stops, letting you fine-tune the extend endpoint on the fly. Remember that the stop screw sets the end position but does not lock the rod; if air pressure drops, the piston drifts. For suspended loads that must hold position on air loss, install an external pilot-operated check valve or rod lock.
Mounting options include LB foot brackets, FA flanges, and TC trunnions, but the SDB pivot block is not available on this adjustable variant. Because this is the -S magnet version, you can directly mount CMSG, DMSG, or EMSG sensors for end-of-stroke confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X75-40S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 40 mm (usable range 35-75 mm); the retract stroke remains fixed at full length. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X75-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.