Airtac MIJ Adjustable Cylinder MIJ16X75-50TC
The AirTAC MIJ Adjustable Cylinder MIJ16X75-50TC is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X75-50TC
Dial in a precise forward end position on-site with the AirTAC MIJ16X75-50TC, a double-acting round-body mini cylinder featuring a 50mm extend-stroke adjustment window. An external stop screw shortens the forward travel from its 75mm nominal length down to 25mm, allowing one part number to cover multiple stop distances without swapping hardware. The retract stroke remains full length, and the screw sets the end stop but does not function as a mid-stroke lock.
Built with a stainless-steel barrel and piston rod, this riveted construction resists mild corrosion and washdown environments. It uses an M5×0.8 port, a Ø6 mm rod with an M6x1.0 male thread, and conforms to the ISO 6432 mounting interface. Fixed TPU bumper pads decelerate the stroke ends, operating at speeds of 30-800 mm/s across a -20 to +70 C range.
Airtac MIJ Adjustable Cylinder MIJ16X75-50TC Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X75-50TC |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X75-50TC
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X75-50TC Is Used
Changeover Dial-In
Quickly re-adjust the extend stop from 25 to 75mm to accommodate different part lengths on a packaging line without changing the cylinder.
Tolerance Take-Up Gate
Fine-tune the forward stroke on the fly to absorb minor mechanical variations in a diverting gate while pushing loads under 60 N.
Staged Feeding Stop
Set a precise intermediate end position using the external screw to stage parts accurately before the next machine cycle.
Is the Airtac MIJ Adjustable Cylinder MIJ16X75-50TC the Right Cylinder?
When sizing this 16mm bore, stepping down to an MIJ12 drops the 0.5 MPa push force to 56.5 N, while stepping up to an MIJ20 raises it to 157.0 N. The 50mm adjustment window is ideal for taking up mechanical tolerances during setup or staging feeds across changeover jobs. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors; choose the -S variant if position detection is required.
This model includes a TC trunnion mount, and standard LB foot or FA flange brackets fit the ISO 6432 dimensions, though the SDB pivot-block is not available on this adjustable-stroke series. Note that a standard cylinder does not hold position on air loss—the piston will drift. For suspended or vertical loads that must remain fixed during pressure loss, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X75-50TC FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50mm on-site, but the retract stroke remains full length. This TC trunnion-mount cylinder uses the ISO 6432 interface. It lacks a magnet (-S), so it cannot take position sensors, and the stop screw is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X75-50TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.