Airtac MIJ Adjustable Cylinder MIJ16X80-30
The AirTAC MIJ Adjustable Cylinder MIJ16X80-30 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 80mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X80-30
Trimming the forward end position by up to 30 mm on site, the AirTAC MIJ16X80-30 lets you fine-tune an 80 mm extend stroke without swapping hardware.
Built with a stainless-steel barrel and piston rod, the riveted construction resists mild corrosion and washdown environments. It conforms to the ISO 6432 mounting interface for easy bracket drops, uses an M5×0.8 port, and relies on fixed TPU bumper pads for end-of-stroke deceleration. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors without switching to the -S variant.
Airtac MIJ Adjustable Cylinder MIJ16X80-30 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X80-30 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X80-30
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X80-30 Is Used
Staged Part Feeding
Use the adjustable extend end to meter components off a conveyor belt, fine-tuning the 80 mm stroke on-site to accommodate different product lengths without changing cylinders.
Is the Airtac MIJ Adjustable Cylinder MIJ16X80-30 the Right Cylinder?
When sizing this 16 mm bore, dropping down to an MIJ12 lowers the push force to 56.5 N at 0.5 MPa, while stepping up to an MIJ20 raises it to 157.0 N. The 30 mm external stop screw is ideal for taking up mechanical tolerances or staging feeds, effectively giving you one part number covering several forward stops.
Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is unavailable here), and select the -S version if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X80-30 FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa, and the air port is M5×0.8.
An external stop screw shortens the extend stroke by up to 30 mm on site, while retract remains full. This screw sets the forward end position but is not a mid-stroke lock; the piston drifts on air loss. Also, this non-S SKU has no magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X80-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.