Airtac MIJ Adjustable Cylinder MIJ16X80-50S
The AirTAC MIJ Adjustable Cylinder MIJ16X80-50S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 80mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X80-50S
Dial in a precise forward end position on-site with the AirTAC MIJ16X80-50S, a round-body stainless steel mini cylinder featuring a 50 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward travel from its 80 mm nominal length down to 30 mm, allowing one part number to cover multiple stop distances without changing the hardware. The retract stroke remains full length. Built with a riveted stainless barrel and Ø6 mm rod, it withstands mild corrosion and washdown environments.
It conforms to the ISO 6432 mounting interface for standard mini brackets and features an M5×0.8 port. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG sensors, while fixed TPU bumper pads absorb end-of-stroke impacts.
Airtac MIJ Adjustable Cylinder MIJ16X80-50S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X80-50S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X80-50S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X80-50S Is Used
Adjustable Gauge Stop
Set precise measuring distances up to 80 mm. The 50 mm trim window allows operators to dial in the exact contact point for varying part lengths on a single fixture.
Staged Part Diverter
Fine-tune the extend distance on-site to accommodate different product widths without swapping cylinders.
Carton Flap Folder
Tuck packaging flaps in washdown zones. The stainless construction handles damp environments while the adjustable stop prevents overtravel on varying box sizes.
Is the Airtac MIJ Adjustable Cylinder MIJ16X80-50S the Right Cylinder?
The 50 mm adjustment screw is ideal for taking up mechanical tolerances during setup or staging feeds across changeover jobs. Remember that the stop screw only sets the end position; it is not a mid-stroke lock. The cylinder will drift on air loss, so add an external rod lock or pilot check valve for held loads. Mounting options include LB, FA, and TC styles, but the SDB pivot block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X80-50S FAQ
The theoretical max force is 20.5 kgf at 1.0 MPa, and the air port is M5×0.8.
The external stop screw shortens the extend stroke by up to 50 mm without affecting the full retract stroke. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X80-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.