Airtac MIJ Adjustable Cylinder MIJ16X85-10S
The AirTAC MIJ Adjustable Cylinder MIJ16X85-10S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø16mm bore and 85mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke85 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ16X85-10S
Dial in a precise forward end position on the fly with the AirTAC MIJ16X85-10S, a round-body stainless steel mini cylinder built for double-acting operation. An external stop screw lets you trim the extend stroke by up to 10 mm on site, yielding a usable forward travel of 75 to 85 mm without swapping parts. The retract stroke remains full length.
The riveted stainless barrel and rod shrug off mild washdown environments, and the built-in magnet (-S) supports CMSG, DMSG, or EMSG position switches. Conforming to the ISO 6432 mounting interface for mini cylinders, it drops into standard brackets. Fixed TPU bumper pads absorb end-of-stroke impacts.
Airtac MIJ Adjustable Cylinder MIJ16X85-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ16X85-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 85 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ16X85-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ16X85-10S Is Used
Package Diverter Gate
Shift boxes on a line by dialing the forward stop between 75 and 85 mm to accommodate varying carton widths without changing cylinders.
Is the Airtac MIJ Adjustable Cylinder MIJ16X85-10S the Right Cylinder?
The 10 mm external adjuster is ideal for taking up mechanical tolerances during setup or covering multiple stop positions with a single part number. Remember that the stop screw only sets the forward end position; it is not a mid-stroke lock. If the application requires the load to be held upon air loss, the piston will drift, so you must fit an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot block is not offered on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ16X85-10S FAQ
This 16 mm bore cylinder uses an M5×0.8 port. At 0.5 MPa it pushes with 100.5 N and pulls with 86.4 N. At 0.7 MPa it pushes with 140.7 N and pulls with 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm (usable extend 75-85 mm), but the retract stroke remains full length. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ16X85-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.