Airtac MIJ Adjustable Cylinder MIJ25X10-10
The AirTAC MIJ Adjustable Cylinder MIJ25X10-10 is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X10-10
Dial in a precise forward end position on-site with the AirTAC MIJ25X10-25, a round-body stainless steel mini cylinder featuring a 10 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke by up to 10 mm without swapping parts, while the retract stroke remains full length. This makes it highly effective for taking up mechanical tolerances or staging parts during changeovers.
Built with a riveted stainless barrel and rod, the unit resists mild corrosion and handles washdown environments. The Ø25 bore conforms to ISO 6432 mounting dimensions and uses a 1/8" port. Fixed TPU bumpers decelerate the stroke ends, but note this non-magnet SKU cannot host position sensors.
Airtac MIJ Adjustable Cylinder MIJ25X10-10 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X10-10 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X10-10
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X10-10 Is Used
Precision Stop Calibration
Trim the forward stroke up to 10 mm on-site to dial in exact contact points for light pressing tasks, absorbing mechanical tolerances without machining new spacers.
Washdown Sorting
Rely on the stainless steel construction for mildly corrosive packaging environments, using the settable extend limit to push cartons into diverter lanes accurately.
Is the Airtac MIJ Adjustable Cylinder MIJ25X10-10 the Right Cylinder?
The 10 mm adjustment screw is ideal for fine-tuning the extend endpoint to absorb setup tolerances on the fly. Mount this cylinder using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers (SDB pivot blocks are not offered for this adjustable type). If your assembly needs position feedback, select the -S magnet version to enable CMSG, DMSG, or EMSG switches.
Keep in mind that the stop screw only sets the forward end position; it is not a mid-stroke lock. The piston will drift if air pressure is lost, so install an external rod lock or pilot check valve if you need to hold a suspended load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X10-10 FAQ
At 0.7 MPa, push increases to 343.4 N and pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. It features a 1/8" air port and a 10 mm piston rod with an M10x1.25 male thread.
An external stop screw shortens the extend stroke by up to 10 mm so you can fine-tune the forward endpoint; the retract stroke remains full length. This SKU does not include a magnet, meaning it cannot support CMSG, DMSG, or EMSG position sensors. You would need the -S variant for switch readiness.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.