Airtac MIJ Adjustable Cylinder MIJ25X150-100S
The AirTAC MIJ Adjustable Cylinder MIJ25X150-100S is a genuine double acting, double rod, adjustable stroke round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ25 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ25X150-100S
Dial in a precise forward end position on-site with the AirTAC MIJ25X150-100S, a double-acting round-body mini cylinder featuring a 100 mm extend-stroke adjustment window. An external stop screw lets you shorten the forward stroke from its 150 mm nominal length down to 50 mm, absorbing setup tolerances and covering multiple stop points with a single part number. Retract remains at the full stroke length. The stainless-steel barrel and piston rod supply mild corrosion and washdown resistance for demanding industrial environments.
The unit features a 1/8" port, a Ø10 mm rod with an M10x1.25 male thread, and fixed TPU bumper pads to decelerate the stroke end. Because this SKU includes the -S magnet option, it is fully ready for CMSG, DMSG, or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ25X150-100S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ25X150-100S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MIJ Adjustable Cylinder MIJ25X150-100S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ25X150-100S Is Used
Staged Feed Diverter
Pushes packages at 245.3 N, using the 100 mm adjuster to alter the extend endpoint for different box sizes on the fly without swapping hardware.
Tolerance Take-Up Press
Compensates for material thickness variations by fine-tuning the extend end position on-site, delivering precise contact without custom fixtures.
Is the Airtac MIJ Adjustable Cylinder MIJ25X150-100S the Right Cylinder?
If your application requires less force, stepping down to a 20 mm MIJ bore drops the push force to 157.0 N, while stepping up to a 32 mm MIJ bore increases it to 402.2 N. The 100 mm external adjuster is ideal for changeover jobs where you need staged feeds or varying forward stops without machining new hard stops. The screw sets the end position but does not function as a mid-stroke lock; if you need to hold a load vertically on air loss, add an external rod lock or pilot check valve. For mounting, you can use LB foot, FA flange, or TC trunnion brackets, along with CA, U, R, or CM back covers, but note the SDB pivot block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ25X150-100S FAQ
The theoretical maximum force is 50 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm (usable forward range 50-150 mm), but retract remains full length. The -S suffix means a piston magnet is built-in for CMSG/DMSG/EMSG sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ25X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.